NTI Trin & Stor S80 User Manual

Trin & Stor
Model Numbers: S, S-SR, SL Series
Version Date: 2014-08-06
30 Stonegate Dr.
Saint John, NB
E2H 0A4 Canada
INDIRECT WATER HEATERS
INSTALLATION AND OPERATION INSTRUCTIONS
To be installed in conjunction with an NTI Boiler
TABLE OF CONTENTS
1.0 INTRODUCTION ................................................................................................................ 2
Trin & Stor Specifications .................................................................................................... 2
Solar Certifications and Approvals ....................................................................................... 2
I.O.M. Checklists .................................................................................................................. 3
2.0 WATER HEATER PIPING ................................................................................................. 7
Domestic Side Piping ........................................................................................................... 7
Boiler System Piping ............................................................................................................ 9
Solar System Piping .............................................................................................................. 9
3.0 TANK SENSOR ................................................................................................................. 14
4.0 START UP AND CHECK OUT ........................................................................................ 18
5.0 ANNUAL MAINTENANCE AND INSPECTION ........................................................... 18
6.0 PARTS LIST ...................................................................................................................... 19
HAZARD SYMBOLS AND DEFINITIONS
Danger Sign: Indicates a hazardous situation which, if not avoided, will
result in serious injury or death.
Warning Sign: Indicates a hazardous situation which, if not avoided,
could result in serious injury or death.
Caution Sign plus Safety Alert Symbol: Indicates a hazardous situation
which, if not avoided, could result in minor or moderate injury.
Caution Sign without Safety Alert Symbol: Indicates a hazardous
situation which, if not avoided, could result in property damage.
Notice Sign: Indicates a hazardous situation which, if not avoided,
could result in property damage.
This Indirect Water Heater must be installed by a licensed and trained
Heating Technician or the Warranty is Void. Failure to properly
install this unit may result in property damage, serious injury to occupants, or possibly death.
NTI 84230
NEW PRODUCT LINE
Indirect Water Heaters
Stainless Steel
Stainless Steel Solar
Stone Lined
S-SR Series
S Series
SL Series

NTI Trin & Stor S80 Specifications

General

Brand	NTI
Model	Trin & Stor S80
Category	Water Heater
Language	English

Summary

Hazard Symbols and Definitions

1.0 Introduction

Trin & Stor Specifications

Details specifications for Trin & Stor indirect water heaters, including capacity and dimensions.

Solar Certifications and Approvals

Information on solar certifications and approvals for specific models.

I.O.M. Checklists and Pre-Installation

Lists of checklists for Installation, Operation, and Maintenance, including pre-installation steps.

General Installation Requirements and Safety

Important installation guidelines, warnings, and safety precautions.

Potable Water Safety: Temperatures and Hazards

Discusses risks of Legionella bacteria and scalding, and preventative measures.

Applicable Legislation and Guidelines

Covers legislation and guidelines for preventing Legionella in water systems.

2.0 Water Heater Piping

Domestic Side Piping and System Preparation

Details on domestic piping, system flushing, and water chemistry requirements.

Water Heater Installation Specifics

Covers T&P relief valve, tank sensor, drain valve, backflow preventors, and expansion tanks.

Boiler and Solar System Piping

Instructions for connecting to boilers and different configurations for solar piping.

3.0 Tank Sensor

Tank Sensor Installation Procedure

Step-by-step guide for installing the tank sensor into the thermal well.

Wiring Tank Sensor to Boiler Control

Wiring instructions for connecting the tank sensor to NTI Trinity boilers.

Boiler Control Settings for Tank Sensor

Adjusting settings on Trinity boilers for optimal tank sensor operation.

4.0 Start Up and Check Out

Filling and Operational Checks

Steps for filling the water heater and performing operational checks for safe startup.

5.0 Annual Maintenance and Inspection

Inspection and Maintenance Procedures

Visual inspections, temperature checks, relief valve operation, and system maintenance.

Draining and Heat Exchanger Reinstallation

Procedures for draining the water heater and reinstalling the heat exchanger.

6.0 Parts List

Indirect Water Heater Components

List of available parts for Trin & Stor indirect water heaters.