1
nuaire.co.uk 029 2085 8400 15. 09. 17. Leaflet Number 671052
The EMC Directive
2014/30/EU
The Low Voltage
Directive
2014/35/EU
XS Ceiling Fan Kits 50 / 60Hz
Supply / Extract Units
Installation and Maintenance
1.0 Safety Information
IMPORTANT: Installation or replacement of units or spare parts must be carried out by a qualified
or Nuaire approved service engineer/ electrician and in accordance with IEE or local national wiring
regulations.
2.0 Introduction
The Nuaire XS Ceiling Fan Kit is available in 6, 9 and 12 inch impeller
sizes suitable for supply or extract and can be the heart of a room’s
automatic ventilation system.
Ensure adequate air replacement for the fan and any fuel burning
appliance in the room.
2.1 Switching
Operated via a separately wired 3 amp fused spur (by others) or
operated via the optional XS-MFC remote controller allowing supply or
extract, variable speed and automatic or manual switching of several
fans if desired.
2.2 Sensors
Sensors are available as remote units or integral ‘plug in’ units. They
are able to control multiple fans, depending on sensor and fan types.
Integral sensors are quick and easy to install and are aesthetically
pleasing, whilst remote sensors give the benefit of location close to
the pollutant source. Remote sensors can be fitted with an optional
security strap to prevent unwanted tampering.
2.3 General
The removable interior grille provides easy access while the external
rotor motor makes for simple removal of the push-on impeller for
cleaning. Upward angled interior grille vanes shield workings from view.
The fan is IP24 splash proof approved with the motor rated at IP44.
Fan casing, impeller and shutter shall be manufactured from UV
stabilised ABS polymer. All models shall include an economy /high
efficiency setting facility and are dove grey in colour.
2.3.1 Coding For Ceiling Fan Kits
* H indicates 220V 60Hz 1ph
Ceiling Fan Kits are supplied as a complete package with all
installation parts included.
Fan assembly
Internal Grille
Mounting
Duct Adaptor
Brackets
Mounting
Screws
Figure 1. Main components of ceiling installation assembly.
Description Code (50 Hz) Code* (60 Hz)
6 inch Ceiling Fan Kit Complete XS6CL XS6CLH
9 inch Ceiling Fan Kit Complete XS9CL XS9CLH
12 inch Ceiling Fan Kit Complete XS12CL XS12CLH
3.0 Dimensions Figure 2.
350 mm*
230 mm*
250 mm*
200 mm*
200 mm*
200 mm*
269 mm
134 mm*
137 mm*
128mm
272mm
XS6CL (6 inch) XS9CL (9 inch) XS12CL (12 inch)
Rear view
269mm
Required ceiling/panel aperture
270 x 270mm sq.
Cable entry
337 mm
*To centre of
'duct'
171 mm*
175mm*
130mm
342mm
342mm
Required ceiling/panel aperture
340 x 340mm sq.
Cable entry
413mm
*To centre of
'duct'
206 mm*
214 mm*
169 mm
420mm
420mm
Required ceiling/panel aperture
430 x 430mm sq.
Cable entry
*To centre of
'duct'
*Duct Adaptor
Side view
Duct Adaptor Outlet dia.*
6 inch unit 200mm dia.
9 inch unit 250mm dia.
12 inch unit 350mm dia.
To Next Page
Need help?
General
