This document provides installation and operation instructions for a DC Inverter Heat Pump, designed for heating and cooling applications. It covers various models including NE-C3BZ-B2F, NE-C5BZ-B2F, NE-C6BZ-B2F, NE-C8BZ-B2IIF, and NE-C10BZ-B2IIF.
Function Description
The DC Inverter Heat Pump is a versatile unit capable of providing both heating and cooling, as well as hot water. It operates as a heat pump water heater, utilizing inverter technology for efficient energy use. The system is designed to circulate water, which can be used for various purposes such as domestic hot water or floor heating. The unit extracts heat from the ambient air and transfers it to the water, or vice versa for cooling, making it an energy-efficient solution for climate control and water heating.
Important Technical Specifications
The manual details several technical parameters for different models:
General Specifications:
- Ring Temperature Working Range: -25°C to 43°C
- Water Temperature Working Range: 7°C to 60°C
- Water Pressure Working Range: ≤0.45 MPa
- Refrigerant: R410A (weights vary by model)
- Control Panel Fuse Wire: T6.3AL/250V
- Water Pipe Diameter: G3/4" (inner) for NE-C3BZ-B2F, G1" (inner) for NE-C5BZ-B2F and NE-C6BZ-B2F, G1-1/2" (inner) for NE-C8BZ-B2IIF and NE-C10BZ-B2IIF.
Model-Specific Parameters:
NE-C3BZ-B2F:
- Size (LWH mm): 1119340912
- Net Weight (KG): 100
- Power Source: 220V~50Hz
- Rated Cooling Capacity (W): 7500
- Rated Refrigerating Input Power / Current (A): 2560W / 11.6A
- Rated Hot Water Heating Capacity (W): 8450
- Rated Heating Input Power / Current (A): 2500W / 11.4A
- Rated Floor Heating Capacity (W): 5390
- Rated Heating Input Power / Current (A) (Floor Heating): 2300W / 10.5A
- Maximum Input Power / Current (A): 3250W / 14.8A
- Refrigerant / Weight: R410A / 2200g
- Rated Water Flow (m³/h): 1.29
NE-C5BZ-B2F:
- Size (LWH mm): 11193471249
- Net Weight (KG): 135
- Power Source: 220V~50Hz
- Rated Cooling Capacity (W): 12500
- Rated Refrigerating Input Power / Current (A): 4300W / 19.5A
- Rated Hot Water Heating Capacity (W): 14000
- Rated Heating Input Power / Current (A): 4180W / 19.0A
- Rated Floor Heating Capacity (W): 9300
- Rated Heating Input Power / Current (A) (Floor Heating): 4130W / 18.4A
- Maximum Input Power / Current (A): 5400W / 24.5A
- Refrigerant / Weight: R410A / 3000g
- Rated Water Flow (m³/h): 2.15
NE-C6BZ-B2F:
- Size (LWH mm): 11193471249
- Net Weight (KG): 138
- Power Source: 220V~50Hz
- Rated Cooling Capacity (W): 15000
- Rated Refrigerating Input Power / Current (A): 5260W / 23.8A
- Rated Hot Water Heating Capacity (W): 16800
- Rated Heating Input Power / Current (A): 5060W / 23.2A
- Rated Floor Heating Capacity (W): 10770
- Rated Heating Input Power / Current (A) (Floor Heating): 4780W / 21.7A
- Maximum Input Power / Current (A): 6500W / 29.5A
- Refrigerant / Weight: R410A / 3300g
- Rated Water Flow (m³/h): 2.58
NE-C8BZ-B2IIF:
- Size (LWH mm): 12115681496
- Net Weight (KG): 155
- Power Source: 220V~50Hz (for cooling) / 380V 3N~ 50Hz (for heating)
- Rated Cooling Capacity (W): 20000
- Rated Refrigerating Input Power / Current (A): 7140W / 32.5A (220V) or 7140W / 12.7A (380V)
- Rated Heating Capacity (W): 22500
- Rated Heating Input Power / Current (A): 7030W / 31.5A (220V) or 7030W / 12.5A (380V)
- Rated Hot Water Heating Capacity (W): 14500
- Rated Floor Heating Input Power / Current (A): 6500W / 29.5A (220V) or 6500W / 11.5A (380V)
- Maximum Input Power / Current (A): 9280W / 42.2A (220V) or 9280W / 16.6A (380V)
- Refrigerant / Weight: R410A / 4800g
- Rated Water Flow (m³/h): 3.44
NE-C10BZ-B2IIF:
- Size (LWH mm): 12115681496
- Net Weight (KG): 165
- Power Source: 380V 3N~ 50Hz
- Rated Cooling Capacity (W): 25000
- Rated Refrigerating Input Power / Current (A): 8920W / 15.9A
- Rated Heating Capacity (W): 28100
- Rated Heating Input Power / Current (A): 8460W / 15.1A
- Rated Hot Water Heating Capacity (W): 18600
- Rated Floor Heating Input Power / Current (A): 8340W / 14.9A
- Maximum Input Power / Current (A): 12030W / 21.5A
- Refrigerant / Weight: R410A / 5000g
- Rated Water Flow (m³/h): 4.3
Usage Features
The heat pump is designed for user convenience and safety, with several key usage features:
- Control Panel: The unit features a control panel for operation, displaying time, setting temperature, and current temperature. Both DH and HT panel types are shown, with buttons for On/Off, Mode selection (Heating, Cooling, Defrosting), Timer Setting, Up/Down parameter adjustment, and Lock.
- Operating Modes: Users can select between heating, cooling, and defrosting modes.
- Temperature Adjustment: The water temperature can be adjusted to a comfortable level, with a recommended range of 38~42°C for showering. The maximum water temperature is 55°C.
- Safety Precautions: The manual emphasizes several safety features and warnings:
- Professional installation is mandatory.
- Proper grounding is essential and altering the grounding method is forbidden.
- The unit must be filled with water before operation.
- All water system valves must be open during operation.
- A removable filter must be installed at the water inlet and cleaned periodically.
- The unit should not be installed in places with combustible gas leaks.
- Hands or foreign objects should not be inserted into the air outlet.
- In winter, if the unit is powered off or not in use for a long time, all water must be discharged to prevent freezing and cracking of the heat exchanger or water pipes.
- The control panel should not be installed in a bathroom to avoid moisture damage.
- The power connection must include an all-pole disconnect device and leakage protection device with at least 3mm contact distance.
- Damaged power cords must be replaced by a professional.
- The unit's water quality must meet national standards for domestic water consumption.
- Energy Saving: For optimal energy efficiency, the unit should be installed in a well-ventilated area.
- Trial Running: A detailed trial running procedure is outlined, including checks for correct installation, power supply, piping, wiring, ventilation, water drainage, leakage protection, thermal insulation, and grounding. It also involves checking the current, function keys, indicator lights, water leakage in the circulating system, condensed water discharge, and system pressure.
Maintenance Features
Regular maintenance is crucial for the longevity and efficient operation of the heat pump:
- External Cleaning: The unit should be turned off and wiped with a damp cloth and a small amount of neutral detergent. Abrasive cleaners like gasoline or acidic solutions are prohibited.
- Waterway Cleaning: The waterway should be emptied every 3 months. Descaling can be done using organic acids such as formic acid, citric acid, or acetic acid.
- Evaporator Cleaning: The evaporator fins can be cleaned with a hard nylon brush, followed by a vacuum cleaner. Compressed air can also be used for cleaning the fin heat exchanger.
- Filter Maintenance: The removable filter at the water inlet needs periodic cleaning (every 2 or 3 months, depending on local water quality).
- Error Information Code: The manual provides a list of error codes (e.g., E01, E02, E03, E04, E05, E06, E07, E08, E10, E11, E12, E13, E14, E18, E21, E25, E31, E32, E33, E41, E45, E46, E48, E49) to help diagnose potential faults. If an error code appears, users are instructed to turn off the power, wait 10 seconds, and then restart. If the code persists, professional assistance is required.
- Professional Maintenance: The maintenance of the machine must be carried out by professional personnel.
Need help?
General
To Next Page
