Nulite New Energy BKDX30-95I/1/S User Manual

CONTENT
I. Prologue
...................................................................................... 1
II. Main instruction of product
..................................................2
III. Installation
................................................................................7
IV. Trial running
...........................................................................14
V. Operation panel instruction
............................................... 15
VI. Maintenance & Repair
........................................................ 22
Please read this manual carefully before installation
◆ The heat pump must be installed by the professional technician.
◆ Please install the heat pump and connect the water pipe in accordance with this manual strictly.
◆ For safety, please make sure to recheck everything before power on.
◆ If the machine has any improvement, the content is subject to change without notice.
Read the Manual before Operation

Nulite New Energy BKDX30-95I/1/S Specifications

General

Brand	Nulite
Model	New Energy BKDX30-95I/1/S
Category	Heat Pump
Language	English

Summary

I. Prologue

II. Main Instruction of Product

1. Product Parameters

Table of product parameters including model, size, weight, and power source.

2. Unit Appearance

Visual depiction of the heat pump unit's exterior.

3. Appearance Dimensions

Detailed dimensions for different models of the heat pump unit.

4. Technical Specifications

III. Installation Guide

1. Heat Pump Installation

Guidelines for installing the heat pump unit, including location and infrastructure.

2. Connection Diagrams

Diagrams illustrating how to connect the heat pump system components.

3. Circuit Connections

Instructions and precautions for electrical circuit connections.

4. Electrical Circuit Diagrams

IV. Trial Operation

V. Control Panel Operation

1. Indoor Control Panel Overview

Overview of the indoor control panel and its display.

2. Button Functions and Operation

Details on locking, unlocking, power, mode selection, temperature, and clock settings.

3. Timer Settings

Instructions for setting the timer for the unit's operation.

4. Operation Illustration and Displays

Visual guide to the wired controller display and its symbols.

VI. Maintenance and Repair

1. Routine Maintenance Procedures

Detailed steps for routine maintenance of the unit, including cleaning and checks.

2. Parts Replacement

Guidelines for replacing parts of the heat pump unit.

3. System Maintenance and Refrigerant

Steps for refilling refrigerant and addressing leaks.

Malfunction Analysis and Troubleshooting