Num'axes PIE1023 - 3 G and SIM Setup; Manual Setup; MMS Configuration; SMTP Configuration

PIE1023 avec carte SIM NUM’AXES - Indice E – Mars 2022 25/96
Select “ON” then press OK to set the interval; the camera will shoot photos or
video clips automatically upon the user set interval.
WARNING: when the “Time-lapse” parameter is set to ON, the PIR sensor is
deactivated (there is no motion detection).
Configurable Time-lapse from 00:00:05 to 23:59:59.
Example: if Time-lapse is set to 00:30:00, the camera will automatically
capture photos/videos every 30 minutes.
WARNING: don’t turn ON “Time-lapse” and “PIR interval” simultaneously
Working timer
OFF | ON
Each day, the camera will work only during the user set time period.
Select “ON” then press OK to set the start time and end time of the desired
working period.
Example: If the Working timer setting is 15:00-18:00; the camera will work
only between 15h00 (03:00 PM) and 18h00 (06:00 PM) each day.
Cam
PIR
3G
Other
Cam
PIR
3G
Other
Select SIM inserted
SMTP
D
3G Switch
ON
FTP
ON
SIM Setup
auto
Recipients
Manual Setup
SIM PIN
ON
MMS
OFF
SMTP/FTP photo size
S
Exit
Set
Exit
Set
Cam
PIR
3G
Other
Sendings/day
Unlimited
SMS ctrl
By trigger
Daily Report
OFF
Exit
Set
3G
Settings
Programmable options (default settings in bold characters)
Select SIM card
inserted in the device
NUM’AXES SIM | Other operators SIM | No card
Please indicate which SIM card is inserted in the device.
3G Switch
ON | OFF
3G function can be turned off.
SIM Setup
NUM’AXES SIM card
Deactivated parameter | When the NUM’AXES SIM card is inserted, the 3G
setups are automatically entered.
MENU
MENU
OK
OK
MENU
OK