Num'axes PIE1023 - Troubleshooting; Photos Dont Capture Subject

PIE1023 avec carte SIM NUM’AXES - Indice E – Mars 2022 30/96
Day/Night mode
Yes
Infrared flash
58 IR LED | Invisible LED | Wavelength: 940 nm
Flash range: 20 m (65 ft.)
Memory
SD card | Capacity from 4GB up to 32GB maximum | Class 10 minimum
Lens
F=3.0 | FOV=100° | Auto IR-Cut-Remove (at night)
LCD screen
Built-in 2.0” TFT colour screen | RGB | 262k
PIR sensor
Adjustable detection sensitivity: High | Medium | Low
Detection range: 20 m (65 ft.)
Detection angle: 80°
Capture modes
Photo | Video | Photo + Video
Photo resolution
5MP (2560 x 1920) | 8MP (3264 x 2448) | 12MP (4032 x 3024)
Multi-shot
NUM’AXES SIM card: 1 photo per trigger
Other SIM card: programmable from 1 to 5 photos per trigger
Picture files format
JPEG
Video resolution
VGA (640 x 480) | HD 720p (1280 x 720) | FULL HD 1080p (1920 x 1080)
Video length
Programmable from 05 to 59 seconds
Video files format
AVI
Trigger time
Approx. 0.4 second
Camera ID
Programmable
Time-lapse
Programmable
Cycle recording
Programmable
Password
Programmable
Operation power
Batteries: 9V | DC: 12V
Battery type
12 x AA (alkaline or rechargeable Ni-MH)
External power
12V/2A
Stand-by current
0.135mA
Stand-by time
Approximately 8 months
Operating temperature
-25°C to +60°C
Storage temperature
-30°C to +70°C
Operation humidity
5% - 90%
Watertightness
IP66
Dimensions
148 x 117 x 78 mm
Weight
367g
Free mobile App
(Android/iOS)
The PIE1023 trail camera can be remotely configured and triggered via the
mobile application. Application’s name: NumCam
10. Troubleshooting
10.1. The photos do not capture subject of interest
− Check the PIR detection sensitivity parameter setting. For warm environmental conditions, set the
sensor detection sensitivity to “High” and for cold weather use, set the sensor detection sensitivity to
“Low”.