PIE1060 - Indice B – Mars 2022 20/88
6. Customize the operating parameters
To enter the camera settings MENU, slide the switch to the SETUP position (the LCD screen will light up),
then press twice on the button.
Buttons functions in the settings MENU
Allows you to close the main menu or a sub-menu - Return to the previous page
Allows you to go up in a menu or increase a value by 1
Allows you to go down in a menu or decrease a value by 1
Allows you to open a selection or accept the selected settings
Confirm each change made to a setting by pressing the OK button. If the change is not
confirmed by pressing the OK button, the new setting will be lost when you exit the
menu.
Mode Photo
PIR interval 00:20
PIR sensor sensitivity High
Time Lapse OFF
Cycle recording ON
IR LED brightness Auto
Low power night capture No capture
Operating periods OFF
Programmable options (default settings in bold characters)
Photo | Video | Photo + Video
− Photo: the camera shoots only photos based on the configured “Photo
resolution” and “Multi-shot” settings.
− Video: the camera shoots only videos based on the configured “Video
resolution” and “Video length” settings.
− Photo + Video: upon the same trigger event, the camera shoots photo(s)
first then a video based on the configured “Photo resolution”, “Multi-
shot”, “Video resolution” and “Video length” settings.
To Next Page
Loading...
