Num'axes PIE1060 - General Camera Settings; Language and System Defaults; Date, Time, and Time Stamps; Battery Level and Camera Naming

PIE1060 - Indice B – Mars 2022 23/88
Language English
Default settings
Format memory card
Date/Time
AA batteries charge level
Time Format 24 hours
Time stamp ON
Beep sound OFF
Camera name
Camera password OFF
Bluetooth ON
Wi-Fi name (SSID)
Wi-Fi password
Wi-Fi auto power off 1 minute
Camera auto power off 3 minutes
LCD screen standby 1 minute
Version
Firmware update
Settings
Programmable options (default settings in bold characters)
Language
English | Français | Deutsch | … | Español | … | Italiano | …
Default settings
Cancel | OK
Select “OK” to reset the camera back to the factory default settings.
Format memory card
Cancel | OK
Formatting the memory card in the trail camera before using it for the first
time is strongly recommended, especially when the memory card has been
used in other devices. A memory card formatted in another device may not
be compatible.
WARNING: When you format a memory card, the operating system erases all
information and files on the card.
Date/Time
30 / 10 / 2021
02 : 25 31
DD/MM/YYYY
Manually set date/time.
Adjustable time format: DD/MM/YYYY, YYYY/MM/DD or MM/DD/YYYY
NOTE: it is important to set the date and time to ensure some functions work
as expected (for example: time stamp on the photos/videos, operation during
defined time periods).
AA batteries charge level
Allows you to check the charge level of the AA batteries (if you have any
installed).
Time format
12 hours | 24 hours
Time stamp
OFF | ON
Select “ON” if you want the date and time of the capture imprinted on every
photo/video. The temperature, moon phase, energy level of the solar panel
and camera name will also be imprinted on the photos/videos.
Beep sound
OFF | ON
You can choose to hear a beep sound or not when you press a button on the
device.
Camera name
Default name: PIE1060
Such function can help you identify from where and from which camera the
photos/videos are.