SL1008 - Indice A 45/200
Definitions
• Infrared LEDs: invisible light for night time capture.
• Strap Holes: allows you to attach the camera to a pillar or
tree with the provided strap.
• Microphone: picks up the sounds while video in recording.
• Test Laser Beam: allows you to identify the detection
coverage area and the capture area.
Warning: Do not point the laser beam to the eyes.
• LCD status display: displays the setting and camera status.
• Camera Lens: captures the image/video.
• [▲] UP and [▼] DOWN Buttons: allow you to change the
mode and adjust the setting value when the camera is
switched to SET.
• [OK] Confirm Button: allows you to confirm the settings.
• [M] Menu Button: allows you to change the setting.
• Python Cable Holes: allow you to lock the camera to a
pillar or tree by Python cable (not supplied).
• Passive Infrared Sensor (PIR): detects the moving objects.
• Locker: locks the cover in the right location.
• Cover: prevents water leakage, close up with locker after
settings.
• Power Port Cover: open it to connect a DC 12V external
power or battery pack (not supplied) in right polarity.
Tightly close to prevent water leakage.
To Next Page
Loading...
