Numark C3 - Specifications; Input and Output Specifications; Performance Metrics; Equalizer and Power Details

24
SPECIFICATIONS
INPUTS: Line: 10KΩ input impedance
77mV rms sensitivity for 1.22V output
Mic: 600Ω input impedance unbalanced
1mV rms sensitivity for 1.22V output
70mV rms max input
Phono: 47KΩ input impedance
1.2mV rms sensitivity @1kHz for 1.22V output
OUTPUTS: Line: 9V rms max
Headphone: 0.5W into 47 ohm
DISTORTION: less than 0.01%
SIGNAL-TO-NOISE RATIO: Line: > 98dB
(max output; JIS-A weighted) Mic: > 86dB
Phono: > 81dB
FREQUENCY RESPONSE: Line: 20Hz – 20kHz (±0.5dB)
Mic: 20Hz – 15khz (±0.5dB)
Phono: ±1dB (except for controlled attenuation of –3dB
@ 20Hz to reduce rumble and feedback)
CHANNEL EQUALIZER: Bass: +12/-32dB @ 60Hz
Middle: +12/-32dB @ 1.2kHz
Treble: +10/-28dB @ 15kHz
DJ MIC EQUALIZER: Bass: ±10dB @100Hz
Treble: ±10dB @15kHz
POWER CONSUMPTION: 11W typical
14.7W w/full headphone output