Numark iDJ3 - Disassembly Procedures; Removal of Top Housing and Bottom Housing; Removal Sw Pcb Assy

DISASSEMBLY PROCEDURES
1. REMOVAL OF TOP HOUSING AND BOTTOM HOUSING .(Fig1)
(A)TAKE OUT THE 8 PCS KNOB AND 6 PCS VR KNOB AND 13 PCS SCREWS.
(B) REMOVAL OF 5 PCS CONNECTORS BEFORE TAKING OUT THE BOTTOM HOUSING.

2. REMOVAL SW PCB ASS'Y . (Fig. 2)
(A)DISCONNECT OF 4 PCS SCREWS AND 1 PC CONNECTOR , AND REMOVE THE SW PCB ASS'Y .
