Numark iDJ3 - Removal Main Pcb Assy; Removal I;O Pcb Assy

DISASSEMBLY PROCEDURES
5. REMOVAL MAIN PCB ASS'Y. (Fig. 5)
(A) REMOVE OF 15 PCS SCREWS AND 3 PCS CONNECTORS , AND REMOVE THE MAIN PCB ASS'Y.

6. REMOVAL I/O PCB ASS'Y. (Fig. 6)
(A) REMOVE OF 4 PCS SCREWS AND 2 PCS CONNECTORS BEFORE TAKING OUT THE I/O PCB ASS'Y.
