24. FX Parameter. 360 pots with 11-LED position indicator ring
25. FX Select. 20 position encoder with push switch. Relative CC message
26. FX Wet/Dry. 30mm slide pot
27. MASTER BPM TAP: Tapping this enters the BPM for master FX processing
STANDARD
1. MaxMSP test program for production Line
2. AP fest specification
RCA Balance Output
Voltage AC 100V~240V 50~60Hz
MASTER:3.5
0.5V
Volume BOOTH:3.5
0.5V
BALANCED:12
2V
Distortion defection 0.02% below
S/ N 96dBr upward
Separation 94dBr upward
F/R 20~20KHz
0.5dB
1. When test is in progress , gain on Input and headphone is set at Max. volume.
Headphone : UN Balanced:
2. 300mV 1KHz Sin wave form is input to left plug of Aux Input
Volume 7V
1V
S/N 85dBr upward
Distortion defection 0.05% below
F/R 20~20KHz
1dB
To Next Page
Loading...
