Do you have a question about the Numark TTX1 and is the answer not in the manual?
Drive Type | Direct Drive |
---|---|
Speed Settings | 33, 45, 78 RPM |
Platter Diameter | 12 inches |
Tonearm Type | S-shaped |
Outputs | RCA |
USB | No |
Cartridge | Not included |
Weight | 26.4 lbs (12 kg) |
Motor | DC Motor |
Pitch Range | ±8%, ±16%, ±50% |
Platter | Aluminum |
Pitch Control | ±8%, ±16% |
Explains Caution, Important, and Notice symbols for electrical shock and operational guidance.
Covers reading, retaining, heeding instructions, and following operational guidelines.
Addresses cleaning, attachments, water, location, power sources, and overloading risks.
Details grounding, polarization, lightning protection, object/liquid entry, and servicing.
Setup for long mixes and blending techniques.
Setup for scratching and aggressive mixing techniques.
Functions of power, start/stop, and reverse buttons.
Controls for start time, braking time, and RPM selection.
Strobe light, power jack, and key lock button functions.
Pitch fader, counterweight, and scale ring for tonearm setup.
Height adjustment, lock lever, and anti-skate compensation.
Secondary tube lock collar, arm clip, and cue system.
Adjustable feet for leveling and carrying handles for transport.
Voltage selector, IEC terminal, RCA and digital outputs.
PHONO/LINE switch, remote start jack, and key lock note.
Platter direction sensors and multi-function segment indicators.
Pitch, BPM, and pitch range indicators on the display.
Motor RPM, key lock, quartz lock, start, and brake indicators.
Steps to balance the tonearm and set correct stylus pressure.
How to adjust anti-skate to compensate for tracking forces.
Instructions for mounting and connecting cartridges to a head shell.
Procedure for installing integrated cartridges into the tonearm assembly.
What is covered and for how long, including terms and conditions.
Lists conditions and damages not covered by the limited warranty.
Numark's responsibilities for repair or replacement under warranty.
Limits on Numark's liabilities and implied warranties.