To Next PageTo Next PageWhat to do if the target light on my Numark TT500 is flickering?
If the Numark Turntable's target light is flickering, inconsistent, or not working, it's likely that the target light lamp is either burning or has burned out. The suggested solution is to replace the entire target light with a compatible part, such as the Numark TL-1.
Step-by-step guide for connecting IEC power and RCA audio cables to the turntable.
Steps to remove and insert S-Shaped or Straight tonearm tubes, with warnings.
Process for balancing the tonearm to achieve proper stylus pressure (0 grams).
Setting Anti-Skate to compensate for tracking forces and reduce skipping.
Guidance for diagnosing and resolving common operational issues like power, sound, and skipping problems.
Step-by-step guide for connecting IEC power and RCA audio cables to the turntable.
Steps to remove and insert S-Shaped or Straight tonearm tubes, with warnings.
Process for balancing the tonearm to achieve proper stylus pressure (0 grams).
Setting Anti-Skate to compensate for tracking forces and reduce skipping.
Guidance for diagnosing and resolving common operational issues like power, sound, and skipping problems.
General| Motor | Direct Drive |
|---|---|
| Platter | Aluminum die-cast |
| RCA Outputs | Yes |
| Cartridge | Not included |
| Outputs | RCA |
| Speeds | 33 1/3, 45 RPM |
| Tonearm | S-shaped tonearm |
| Dimensions | 450 x 353 x 144 mm |
