Numark X5 - Page 7

5-4. DISASSEMBLE THE SWITCH PCB ASSEMBLY AND REMOVING OF THE
FADERS . (Fig.5-4)
(A) REMOVE 2 KNOBS.
(B) REMOVE 4 SCREWS.
(C) REMOVE 2 METAL PLATE.
(D)REMOVE 2 CABLES ON SWITCH PCB ASSEMBLY.
(E)(F)(G)REMOVE 3 CABLES CONNECTED TO THE FADERS BEFORE REMOVING OF THE FADERS.
(Fig.5-4)
5-5. REMOVING OF THE MAIN PCB ASSEMBLY . (Fig.5-5)
(A) REMOVE 11 SCREWS BEFORE MOVING OF THE MAIN PCB ASSEMBLY.
(Fig.5-5)