Need help?Do you have a question about the Numark X9 and is the answer not in the manual?
General| Brand | Numark |
|---|---|
| Model | X9 |
| Category | Music Mixer |
| Language | English |
Welcome to the Numark X9 mixer and overview of its key features.
Lists all items included in the Numark X9 mixer package.
Instructions for registering your Numark X9 product online.
Essential guidelines for safe and proper setup and operation of the mixer.
Power input connection for the mixer using the included adapter.
Secures the power adapter cable to prevent accidental unplugging.
Main switch to turn the mixer on and off.
Balanced 1/4" outputs for connecting to amplifiers or speakers.
Standard RCA outputs for connecting to amplifiers or speakers.
RCA outputs for connecting a booth monitoring system.
RCA outputs for connecting recording devices like CD or tape decks.
RCA inputs for connecting line-level or phono-level audio sources.
Switch to select the input signal type for RCA inputs.
Terminal for connecting turntable grounding wires to prevent hum.
Additional RCA inputs for line-level devices.
Additional 1/4" input for a second microphone.
Outputs for triggering external devices with crossfader movements.
Controls for input selection, gain, EQ, cue, and volume on each channel.
Controls for master and booth output levels and PGM monitoring.
Controls headphone audio level, mix, and split cue mode for monitoring.
Manages crossfader blending and EQ kill switches for channels.
Adjusts microphone mute, treble, bass, and gain.
Manages effect assignment, activation, intensity, and previewing.
Creates a delayed copy of the signal for rhythmic effects.
A vocoder effect that modifies voice sounds based on pitch.
A classic echo effect with adjustable delay time and feedback.
Simulates hall reverberation with adjustable decay time.
Samples audio and plays it in reverse with added reverb.
Standard echo effect with adjustable output and feedback.
A sweeping flanger effect with adjustable rate and intensity.
Low-pass filter that attenuates high frequencies.
A sweeping phase shifter effect with a 'swooshing' sound.
High-pass filter that attenuates low frequencies.
Automatically pans audio between left and right speakers.
Limited distortion effect, primarily for microphones.
1/4" input for connecting a microphone.
1/4" output for connecting headphones for cueing and monitoring.
Adjusts headphone audio tone, balancing bass and treble frequencies.
Adjusts the crossfader curve for smooth mixing or sharp cuts.
Enables fader-start for the left side of the crossfader.
Enables fader-start for the right side of the crossfader.
Technical details on SNR, Frequency Response, and THD for audio paths.
Details on gain range and EQ crossover frequencies and filters.
Specifies the impedance of the balanced audio outputs.
Information on weight, dimensions, and packaging of the unit.
Details the power rating of the Numark X9 mixer.
To Next Page
