How to fix no brush or scrub function on Numatic Nacecare TT 1117 / 100 Floor Machine?
If your Numatic Floor Machine isn't brushing or scrubbing, first check if the brushes are fitted correctly. If not, fit them. Also, make sure the brush deck is lowered.
What to do if Numatic Floor Machine has poor water pick-up?
If your Numatic Floor Machine isn't picking up water well, several issues could be the cause. The waste-water tank might be full, so empty it. Check for a blocked vacuum hose and clean it if necessary. Ensure hose connections are tight. Also, inspect the debris basket filter and separator filter for clogs and clean them. A poor or damaged separator seal can also cause this issue; try cleaning and refitting the seal, or renewing it if damaged. Finally, check the vacuum hose and floor-tool blades for damage, renewing if needed.
Why is there little or no water flow in my Numatic Floor Machine?
If you're experiencing little to no water flow in your Numatic Floor Machine, start by checking if the clean-water tank is empty and fill it if needed. Also, the clean-water tank filter might be blocked or clogged, so remove and clean it. Ensure the brush deck is lowered.
General| Brand | Numatic |
|---|---|
| Model | Nacecare TT 1117 / 100 |
| Category | Floor Machine |
| Language | English |
To Next Page