Numatic TT 345 User Manual

Numatic
INTERNATIONAL
TT 345/350/455 T & S
OPERATING
INSTRUCTIONS
SPARE
PARTS
MANUAL
i
MAINS OPERATED MACHINES
SUPPLIED BY:
Numatic International Limited,
Chard, Somerset TA20 2GB ENGLAND
http://www.numatic.co.uk
Tel: 01460 68600 Fax: 01460 68458
233018(006)3800
COPY

Numatic TT 345 Specifications

General

Model	TT 345
Category	Floor Machine
Power	1200 W
Voltage	230 V
Frequency	50 Hz
Brush Size	345 mm
Brush Speed	150 rpm
Cleaning Width	345 mm

Summary

Product Identification

Numatic TT 345/350/455 T & S Series

Identifies the specific machine model and series for the manual.

Declarations of Conformity

Multi-Language Compliance Statements

Official statements confirming the product meets EU safety and technical standards in various languages.

Spare Parts Information

Floor Tool Assembly Parts List

Detailed list of part numbers and descriptions for the floor tool assembly.

Technical Data Sheets

TT345 and TT350 Specifications

Technical data, dimensions, and performance details for TT345 and TT350 models.

General Safety and Operation

Cautions, Warnings, and Do's/Don'ts

Essential safety advice, operational warnings, and guidelines for proper machine use.

Detailed Safety and Maintenance

Hazard Warnings and Safe Practices

Specific instructions on safe handling, operation, and maintenance procedures.

Noise and Vibration Information

Information on sound and vibration levels during operation and required protective measures.