EasyManua.ls Logo

Numatic TTB 1117/100 - User Manual

Numatic TTB 1117/100
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
T T B 1117/10 0
TTB 1120/100
TTB 1120/100
TTB 1117/100
Original Instructions - Warning! Read instructions before using the machine.
Attention - Lisez la notice avant d’utiliser la machine.
www.nacecare.com
Owner Instructions
Mode d’emploi

Questions and Answers

  • T
    turnercoreyAug 11, 2025
    Why is there no brush / scrub function on my Numatic Floor Machine?
    • S
      sharon17Aug 11, 2025
      If there is no brush or scrub function in your Numatic Floor Machine: * **No brushes fitted:** Check if brushes are fitted. * **Brush overloaded:** Reset the machine.
  • B
    Brenda WeissAug 17, 2025
    Why my Numatic Floor Machine will not operate?
    • K
      Kimberly JonesAug 17, 2025
      If your Numatic Floor Machine won't operate, there are a few potential causes: * **Missing or blown fuses:** Replace the fuse. * **Battery not connected:** Ensure the battery is properly connected. * **Low battery charge:** Charge the batteries.
  • G
    Gary ColemanAug 23, 2025
    What to do if Numatic Floor Machine has poor water pick-up?
    • T
      Tracy SantiagoAug 23, 2025
      If you're experiencing poor water pick-up with your Numatic Floor Machine, consider the following: * **Waste-water tank full:** Empty the waste-water tank. * **Clogged / blocked vacuum hose:** Remove and clean the vacuum hose. * **Loose hose connections:** Ensure all hose connections are tight. * **Debris basket filter clogged / blocked:** Remove and clean the debris basket filter. * **Separator filter clogged / blocked:** Remove and clean the separator filter. * **Poor separator seal:** Clean and refit the separator seal. * **Low battery charge:** Recharge the batteries.
  • D
    Denise WalterAug 29, 2025
    How to fix little or no water flow in Numatic Floor Machine?
    • W
      William WrightAug 29, 2025
      If your Numatic Floor Machine has little or no water flow, check these items: * **Clean-water tank empty:** Fill the clean-water tank. * **Clean-water tank filter blocked / clogged:** Remove and clean the filter. * **Clean water tap not turned on:** Turn on the clean water tap.
  • D
    Daniel MillerSep 4, 2025
    What to do if Numatic Floor Machine just stops while operating?
    • P
      Paula BarnettSep 5, 2025
      If your Numatic Floor Machine stops while operating, it could be due to: * **Too much load on the brush system:** Reset the machine and decrease the brush load to better suit the floor type. * **Blown fuse in Battery pack:** Replace the 50 Amp fuse.

Numatic TTB 1117/100 Specifications

General IconGeneral
ModelTTB 1117/100
CategoryFloor Machine
Power1100 W
Voltage220-240 V
Weight68 kg
Cleaning Width430 mm
Brush Speed150-300 rpm
Brush Size17 inch
Brush Diameter430 mm
Frequency50 Hz

Related product manuals