To Next Page

To Previous Page

4001 non-addressable control and indicating equipment

User Manual

33-0012-r11_2018-03

All specifications and other information shown were current at the date of publication and subject to change without notice.

CONTROLS

ACK Confirms configuration settings.

RESET Resets the fire detection and alarm system.

HOME Returns the control and indicating equipment to Access Level 1.

NEXT Steps through configuration functions and settings.

BUZZER SILENCE Acknowledges new events and silences the internal sounder.

DELAYS ACTIVE Disables and enables delays of configured alarm devices. When the indicator

is on, the delay is active. Pressing the DELAYS ACTIVE button over-rides the

delays and causes immediate actions.

INDICATOR TEST Illuminates all LEDs and activates the internal sounder.

ACTIVATE/ACTIVATE

ALARMS

Activates audio/visual alarm devices. The LED illuminates when the alarm

devices are active.

DISABLEMENTS

SELECTED ZONES Selects specific detection zone(s) for disablement. Used in conjunction with

NEXT and ACK buttons. The indicator is active when disablements are active.

SOUNDERS

Disables and enables alarm devices. When the indicator is active, the alarm

devices are disabled.

ALARM RELAY

Disables and enables alarm relay output. When the indicator is active, the

alarm relay output is disabled.

FAULT RELAY Disables and enables fault relay output. When the indicator is active, the fault

relay output is disabled.

The DISABLEMENTS buttons are numbered 1 ~ 4. These buttons are also used to enter Access Levels 2 and

Numens 4001 User Manual

Questions and Answers: