20 AACE instructions 21AACE instructions
1
2
3
1
- Line up the Lower Anchor Connectors with
the vehicle’s Lower Anchors and press both
connectors firmly until a click is heard and both
are securely fastened.
Make sure that both Lower Anchor Connectors are
securely attached to the vehicle’s Lower Anchors.
2 - The Lower Anchor Connectors will both show
green when secured properly. (Check to make sure
the booster seat is securely installed by pulling out
on both the Lower Anchor Connectors.
3 - To detach the Lower Anchor Connectors from the
vehicle, move seat bottom out to position 8, then
squeeze the release buttons on the Lower Anchor
Connectors (1) while pulling out. (2)
1
2
click
To Next Page
Loading...
Need help?
General
