32 AACE instructions 33AACE instructions
1
2
4
5
63
Use of Shoulder Belt Positioning Clip
1
- The Shoulder Belt Positioning Clip must be
attached to the horizontal bar located on either
side of the booster seat bottom.
2 - The Shoulder Belt Positioning Clip can be installed
on either side of the booster to achieve the best fit
for your child in your vehicle.
3 - Insert the loop end of the strap around the
horizontal bar on the back of the booster.
4 - Pass the Shoulder Belt Positioning Clip through
the loop
5 - Pull up on the strap.
6 - It is important for the Vehicle Shoulder Belt to
fall within the blue zone, shown in illustration.
To Next Page
Loading...
Need help?
General
