24 AACE instructions 25AACE instructions
1
2
3
Use with Lower Anchors and Recline Feature
The booster has a recline feature to best fit your
vehicle and provide maximum comfort to your child.
1 - Place vehicle seat back in normal upright position.
Connect booster to vehicle Lower Anchors (see
Use of Lower Anchors). Ensure bottom of booster
is in full contact with vehicle seat.
2 - Adjust the seat bottom by holding the Recline
Lever and moving the seat in or out to obtain
desired recline as shown in (1). Ensure the back
of the booster is in contact with vehicle seat as
shown in (2). Adjust or remove vehicle headrest as
needed to remove interference.
If you remove your vehicle headrest, be sure to
stow it in a secure place; check your vehicle
owner’s manual.
3 - WARNING: NEVER use booster when
reclined beyond the recline position 2.
1
2
1
2
To Next Page
Loading...
Need help?
General
