2120
INSTALLATION
INSTALLATION
Tether Strap - Use
Always use the tether strap.
Connect the tether strap to the built-in anchorage tting
in the vehicle, or if there is not one available, install the
anchor tting supplied with this restraint.
Store the extra webbing in the bag attached to the end of
the tether.
NOTE: the tether strap wraps around the sides of the
restraint, not over the top.
If the canopy is tted the tether passes outside it.
Always connect the snap
hook securely to the an-
chorage tting.
To increase webbing
tension pull upper strap
through adjustor.
Tether Strap - Use
PULL
To release webbing tension
press adjustor button and
pull lower strap.
PULL
PRESS
When the restraint is in a
vehicle always t the tether
into the guide at the back.
Tether Strap
Snap Hook
Tether
Anchorage
Tether Adjustor
Tether End
Storage Bag