2EXEC
™
care instructions
DO NOT use bleach or other harsh chemicals
to clean any part of the seat.
DO NOT attempt to iron the covers or pads.
Cleaning and Maintenance
Cleaning the Seat Cover, Slip Cover,
Harness Pads, and Infant Insert
Seat cover, slip cover, harness pads, and infant
insert can be cleaned according to the instructions
on the tag attached to the seat cover. Infant insert
support wedge should be spot cleaned only.
Cleaning the Harness
The child restraint harness system cannot be
removed. DO NOT attempt to remove the harness
system.
When required, harness may be cleaned with a
sponge and warm soapy water.
Towel dry excess water and allow to air dry.
Cleaning the Shell
Shell may be cleaned with a damp sponge.
Towel dry.
Cleaning the Buckle
BUCKLE CANNOT BE REMOVED.
To clean buckle, wipe with damp cloth.
DO NOT use abrasive cleansers on the shell.
To Next Page
Loading...
