Nuna mixx User Manual

14
EN
Assemble Front Wheels
1 Assemble front wheels to front legs. (5)
Check that wheels are securely attached by pulling down.
2 To disassemble front wheel, detach front wheel from front leg (6)-2 while
pressing the release button. (6)-1
Assemble Rear Wheels
1 Assemble brake assembly to rear legs (7), assemble rear wheels to brake
assembly (8). Wrap the connecting tube of rear legs with the ap of the
storage basket, and then snap the three snap buttons (9).
Check that wheels are securely attached by pulling on wheel
assemblies.
2 To disassemble rear wheel, detach rear wheel from rear wheel mount (10)-2
while pressing the release button. (10)-1
Assemble Armbar
1 Align the armbar ends with the armbar mounts, and then insert to lock. (11)
2 To disassemble armbar, press armbar release button (12)-1, and then pull out
the armbar. (12)-2
3 Attach the buttons on the both sides of the soft goods and the seat. (13)-1
The completely assembled stroller is shown as (13).

Nuna mixx Specifications

General

Weight Capacity	50 lbs
Wheel Type	All-terrain
Harness Type	5-point
Seat Orientation	Parent-facing, World-facing
Folded Length	36.5"
Folded Width	23.5 inches
Folded Height	16"
Seat Back Height	20 inches
Storage Basket	Yes
Compatible Car Seats	Nuna PIPA series
Suspension	All-wheel suspension
Canopy	UPF 50+ canopy with peek-a-boo window