How to use the
Nuna MIXX
Securing child
1 To release the buckle latch, push on center button and remove the clips. (14)
2 To secure child, assemble buckle. (15, 16, 17)
3 Fit harness snugly to child by sliding each adjustment buckle. (18)
Adjusting the shoulder harness position
To adjust the position of the shoulder harness anchor, open the zipper of seat
back, turn the anchor to be level with the side facing forward. Thread it through
the shoulder harness slot from back to front (19). Rethread it through the slot
that is closest to child’s shoulder height (20).
To avoid serious injury from falling or sliding out, always secure your child with
harness.
Make sure your child is snugly secured. The space between the child and the
shoulder harness should be about the thickness of one hand.
Do not cross the shoulder belts. This will cause pressure on child’s neck.
Use Canopy
To open the canopy, pull canopy toward front. To fold the canopy, pull canopy
toward back. (21)
It is convenient to see the baby when open the canopy window. (22)
We do not recommend that you remove the canopy. If you have any need to
remove the canopy please contact nuna.
To Next Page
Loading...
Need help?
General
