Adjust Recline
1 There are 5 positions for the backrest.
2 To recline the backrest, squeeze the adjustment button, (23)-1 and pull then
adjust the backrest to a desired angle. (23)-2
3 To raise the backrest, push up.
Make sure the recline is set properly for use.
Adjust Calf Support
1 The calf support has 3 positions.
2 To raise the calf support, push it upwards.
3 To lower the calf support, press in both buttons (24)-1 on the sides and
rotate the calf support downward. (24)-2
4 When the seat is fully reclined at adjust the calf support to vertical, pull out the
containment aps and attach them to the side of the seat base using the snaps
located on the containment aps. (25)
Do not use enclosure with an older child that can push up on hands
and knees or crawl out.
WARNING Child may slip into leg openings and strangle. Never use in
redlined carriage position unless the calf support is raised to cover the front
opening.
Please remove the armbar and take good care of it when the calf support is
in a vertical position on the seat to avoid accidents.
Front Swivel Locks
1 Press the both sides of swivel lock then pull it rearwards to orientate the front
wheel. (26)
2 It is recommended to use swivel locks on uneven surfaces.
To Next Page
Loading...
