When using with the Nuna PIPA infant car seat, please refer to the following
instructions.
1 To attach adapters, place adapters onto mounts as shown. A “click” sound means
the adapter is locked. (34)
2 To attach car seat, place car seat onto adapter as shown. (35), A “click” sound
means the car seat is locked. (36)
3 To remove car seat, lift the car seat upwards (37)-2 while pressing the stroller
release buttons. (37)-1
4. To remove adapters, lift the adapters upwards while pulling the release buttons.
(38)
If you have any problems using the car seat, please refer to the car
seat instruction manual.
Remove car seat before folding.
Use Rain Cover
To assemble the stroller rain cover, place it over the stroller seat. (39)
Always check ventilation, especially in hot weather when the rain cover is on the
product.
Always check that the rain cover has been cleaned and dried before folding.
Do not fold the stroller after assembling the rain cover.
Do not place your child into the stroller assembled with rain cover during hot
weather.
To Next Page
Loading...
