Nuna pipa lite rx Quick Start Guide

7
PIPA
™
lite rx footmuff instructions
1 4
3
2 5
2
1
Product Setup
1 - Pull footmuff over front end of infant carrier.
2 - Align side magnets (1) and corner magnets (2) inside
footmuff fabric with magnets inside infant carrier fabric.
Product Use
3 - For more coverage over your child, pull out top panel
from inside top panel pocket.
DO NOT use top panel if it covers child’s face. Outer
edge of top panel should be at or below child’s shoulder
level.
4 - When not using top panel, tuck top panel inside top
panel pocket.
5 - When using footmuff inside vehicle, follow PIPA lite rx
infant car seat instructions for installation.
MAKE SURE footmuff does not interfere with belt
routing/installation.
6
PIPA
™
lite rx footmuff instructions

Nuna pipa lite rx Specifications

General

Brand	Nuna
Model	pipa lite rx
Category	Baby Carrier
Language	English