Nuna pipa lite rx User Manual

2
1
2
1
3
4
5
PIPA lite rx instructions 29PIPA lite rx instructions28 PIPA lite rx instructions PIPA lite rx instructions
Product Use
1 - Top of child’s head should be at
least 1 inch below top of child
restraint.
Securing Child in Child Restraint
2
- Loosen harness by pressing
on adjustment button (1) while
pulling on the harness straps. (2)
3 - Press button to release the
halves of the chest clip. (1)
Separate chest clip and spread
harness straps apart. (2) Press
buckle button. (3)
4 - Place child in child restraint in
seated position. The child should
be seated against both the back
and bottom of the seat with no
gap behind the child. Do not
allow child to slouch.
5 - Adjust the harness height by
pulling up or pushing down on
the head support/harness height
adjustment loop (p.24).
Harness straps must be
positioned at or just below
child’s shoulders to avoid injury.
Gently guide child’s arms through
harness straps. If more harness
length is needed, see page 26 for
instructions.
(continued on the next page)
1
3
2
2
1 inch
(25 mm)

Nuna pipa lite rx Specifications

General

Brand	Nuna
Model	pipa lite rx
Category	Baby Carrier
Language	English