Nuna pipa lite rx User Manual

54 PIPA lite rx instructions PIPA lite rx instructions
1
55
Child Restraint Only
Install (continued)
1
- Tighten vehicle belt while
pushing child restraint firmly
into vehicle seat. Lock the
vehicle belt. Refer to vehicle
owner’s manual for instructions.
If you cannot lock the vehicle
belt, you must use a locking clip
(see note below).
Tension the vehicle belt as
much as possible, checking that
it is not loose or twisted.
If you need a locking clip,
contact Nuna Customer Service:
By phone: 1.855.NUNA.USA
By email: infousa@nunababy.com
Check Installation
Blue line on label must be level
with ground.
Vehicle belt must be buckled,
tight and must stay locked.
Child restraint should be stable
and not move side to side more
than 1 inch at belt path.
1

Nuna pipa lite rx Specifications

General

Brand	Nuna
Model	pipa lite rx
Category	Baby Carrier
Language	English