Nuna Pipa User Manual

15
4 Gently guide child’s arms
through harness loops. Insert
buckle tonges into buckle. Listen
for clicks. Pull on buckle to verify
it is latched.
5 Snap the chest clip together
and temporarily slide towards
buckle for tightening of harness.
6 Tighten harness by pulling on the adjuster strap. Pull any
excess harness webbing through the buckle towards the
child’s shoulder and pull on the adjuster strap. This may
need to be repeated several times for proper fit.
7 Verify that the harness is snug around the child’s waist and
shoulders.
8 Position the chest clip so it is
at child’s armpit level.

Nuna Pipa Specifications

General

Product color	Red
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Side protection	Yes

Weight and Dimensions

Depth	700 mm
Width	435 mm
Height	530 mm
Weight	3950 g