Nuna Pipa User Manual

26
Installation in an Aircraft
1) Position carrier so that child is
facing the aircraft seat.
2) Route the aircraft lap belt under
both lap belt guides and buckle.
3) Adjust the angle of the carrier.
A rolled up towel or foam pool
noodle may be used to help
adjust the amount of recline.
(Page 24) The angle is correct
when the blue line is level with
the floor of the aircraft.
4) Tighten the aircraft belt while
pushing the carrier firmly into
the seat.
• When installing in an airplane using a base, follow
the instructions for vehicle installation with a base
using lapbelt only. (Page 21)
This Child Restraint is certified for use in commercial aircraft.
Be sure to contact your airline prior to travel to discuss their
Child Restraint policy.
Installation on a Stroller
• The Nuna Pipa car seat can attach to Nuna strollers using
adapters. Instructions are included with the adapters, which
are sold separately.
• The Nuna Pipa can also attach to other brands of strollers
using adapters. Please visit nuna.eu for more information.

Nuna Pipa Specifications

General

Product color	Red
Car seat group	0+ (0 - 13 kg; 0 - 15 months)
Side protection	Yes

Weight and Dimensions

Depth	700 mm
Width	435 mm
Height	530 mm
Weight	3950 g