1817
REBL basq Instructions
REBL basq Instructions
EN
EN
Securing Child
After the child is placed into the seat, check whether
the Shoulder Harness Straps are at the proper height.
(25)
1 - While pressing the adjustment button located at
the front of the Enhanced Child Restraint, pull the
two Shoulder Harness Straps of the Enhanced
Child Restraint. (18)
2 - Unlock the buckle of the harnesses by pressing
the red button. (19)
3 - Fix the buckles on the both sides of seat to make
placing the baby more convenient. (20)
4 - Place the child into the Enhanced Child Restraint
and lock the buckle. Please refer to. (21)
5 - Tighten the shoulder harness straps by pulling the
adjustment webbing. (26)
Make sure the space between the child and the
Shoulder Harness Straps is about the thickness of
one hand.
3 - Fix the buckles on the both sides of seat to make
placing the baby more convenient. (20)
4 - Place the child into the Enhanced Child Restraint
and lock the buckle. Please refer to (21).
5 - Tighten the shoulder harness straps by pulling the
adjustment webbing. (22)
Make sure the space between the child and the
Shoulder Harness Straps is about the thickness of
one hand.
Toddler Mode (Forward Facing Mode)
Forward Facing
Child height 76cm-105cm/Child weight≤18.5kg
Recline position
Position 1-7
NOT allowed to use forward facing before the age
of 15 month.
1 - Press the rotating button to rotate the seat facing
the vehicle's moving direction. (23)(24)
Please recline the seat to be in positions 3
through 7 for ease of rotation.
2 - Forward facing mode assembled as (24)
The ISOFIX connectors must be attached and
locked onto the ISOFIX anchor points. (24)-1
The load leg must be installed correctly with
green indicator. (24)-2
To Next Page
Loading...
Need help?
General
