18 TRVL instructions 19TRVL instructions
5
1
Product Use
Securing Your Child
The parking brake MUST be engaged when the stroller is
stopped and when placing and removing child.
To avoid serious injury from falling or sliding out, always
secure your child with the harness.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and
the shoulder harness should be about the thickness of
one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child’s neck.
1 - Push the center button on the buckle to release the
buckle latch, remove the clips and place your child
in the stroller. (1)
2 - Connect the shoulder buckle and hip buckle. (2)
3 - Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side. (3)
4 - Fit the harness snugly to your child by pulling the
adjustment straps to tighten (4)-1. Then pull the waist
adjustment straps out (4)-2.
Shoulder Harness Position
5 - The upper shoulder harness buckles can be moved up
and down for added adjustment.
2
3
4
1 1
2
2
To Next Page
