11
sible for ensuring that periodic machine maintenance is correctly performed.
The persons installing and using the machine and performing machine maintenance shall
inform the manufacturer of any defects or damages due to wear that might jeopardize the
original safety features of the machine.
The installer shall be responsible for checking that the machine is installed in tolerable envi-
ronmental conditions such as to not to create health or safety hazards for those using the
machine.
Any responsibility deriving from components manufactured by third parties and installed on
the machine shall be assumed by the respective manufacturers; responsibility attributable to
the persons authorized to use the machine shall be assumed by the customer.
The machine is designed for 24-hour intermittent service. The machine components are
designed and built to ensure at least 1000 hours’ operation.
Good cleaning and maintenance also contribute to determining long machine life.
2.3. BASIC SAFETY PRECAUTIONS
Never touch the machine with damp or wet hands.
Never use the machine when barefoot.
Never attempt to unplug the machine by pulling the power cord or the machine itself.
Do not expose the machine to atmospheric agents (sun, rain, etc.).
Never allow the machine to be used by children or by irresponsible persons.
Always unplug the machine from the power supply before performing any cleaning or main-
tenance operations.
Do not use jets of water or detergents for cleaning.
In the case of machine breakdown or malfunction, switch the machine off and do not tamper
with it. For repairs contact only an authorized service center and request use of original spare
parts.
Non-observance of the above precautions may make the machine unsafe for future use.
Do not leave the machine switched on when not in use. Unplug the machine when not in use.
Do not obstruct the ventilation and/or heat dissipation openings and/or slits nor introduce
water or any other liquids into same.
Replace the power cord immediately if damaged.
Do not introduce spoons, forks or other utensils into the cofee bean container for any reason
while the machine is running.
Do not immerse the base containing the motor or the body of the machine in water.
When moving or handling the machine, never grip it by the coffee bean container; before
handling the machine, check that the container is firmly fixed to the body of the machine.
Never leave the motor running with the container empty.
Should a foreign body stop the motor, switch the machine off immediately and contact an
authorized service center.
Libretto AMM-AMMT 23-06-2001 11:30 Pagina 11
To Next Page
Loading...
Need help?
General
