Nuovo
Operating instructions for use
EB EASY-PRINTER
Eggland’s Best, Inc. Operating Standards Manual- EB Easy Printer Manual 16/001
Confidential. Do not reproduce without permission December 6, 2016
4 Set-up and adjustment of the machine
4.1 Place of use of the EB Easy Printer machine
The EB EASY-PRINTER machine is to be operated in a plant conforming to USDA and EB standards.
The machine should be operated in a dry environment.
The machine must be accessible from at least one side.
The EB EASY-PRINTER machine should be installed horizontally.
4.2 Electrical connection
Make sure signal, power supply and especially the ground are in order.
The EB EASY-PRINTER has to be wired for the type of packer it is going to be used on.
Power supply unit: 110/230 Volt and 50/60 Hertz.
Caution:
• Components within the machine are under high voltage. Only remove the cover when the power
supply has been disconnected.
• An incorrect or malfunctioning power supply can lead to overload of the circuits and damage to the
machine.
5 Description of the EB Easy Printer Machine
5.1 Function
The EB EASY-PRINTER machine is designed to stamp eggs. This process involves screen printing using USDA
approved food grade ink.
5.2 Protective cover
Caution: Disconnect the power supply before opening the electrical cabinet.
To Next Page