Nupower EVOLUTION NPECH250 - GENERAL SAFETY INSTRUCTIONS

14
GB
GENERAL SAFETY INSTRUCTIONS
Beforeattemptingtooperatethismachine,youmustread,
understand and follow these instructions very carefully
as they are intended to ensure your safety and that of
othersandalsoalongandtrouble-freeservicelifeofthe
machine.
Learn how to use the power tool, its limitations and
potentialhazards.Keeptheseinstructionsinasafeplace
forfuturereference.
Avoidunintentionalstarting-Unplugthepowertools
Beforestartingthepowertool,alwaysmakesurethatyou
haveremovedthekeyandadjustingwrenches.
Before plugging the tool into the mains supply, always
makesurethattheswitchisintheOFFposition.
Make sure that power tools are disconnected from the
mainssupplywhennotinuse,priortoservicing,lubrication
or adjustment and when replacing accessories such as
blades,bitsandcutters.
Check damaged parts
Before using the power tool, always inspect it carefully
to determine that it will operate properly and perform its
intendedfunction.
Checkcorrectalignmentofmovingparts,makingsurethey
donotbind.Checkforanydamagedcomponentsandmake
surethatthepowertoolhasbeencorrectlyassembled.
Check for any condition that may affect operation of the
powertool.
Unlessotherwiseindicatedinthisinstructionshandbook,
aguardoranyotherpartofthepowertoolthathasbeen
damagedmustberepairedorreplacedbyanauthorized
servicecenter.
Any switch that does not work correctly must be replaced
byanauthorizedservicecenter.
Whenworking,alwayswearpersonalprotectiveequipment:
safety goggles, gloves, mask, ear protectors, non-slip
safetyshoes.
Neverwearlooseclothesorjewelrythatmaybetrappedin
movingparts;longhairmustbetiedback.
Alwaysworkonastablebase.Keeptheworkareaclean
andtidy.
Never open or modify the power tool or its accessories in
anyway.
Donotexposethepowertooltorain,oruseindamporwet
locations.Keeptheworkareawelllit.
Do not use power tools in areas where there is a risk of
explosion or fire from combustible materials, flammable
liquids, paint, varnish, petrol etc. flammable gases and
dustofanexplosivenature.
Beware children and pets
Childrenandpetsshouldbekeptoutoftheworkarea.
All power tools should be kept out of the reach of children
and,preferably,storedorlockedinasecurecabinetordry
roomwhennotinuse.
Do not force the power tool
Thepowertoolwilldoabetterandsaferjobandgiveyoumuch
betterserviceifitisusedattherateforwhichitwasdesigned.
Maintain tools with care
Keephandlesdry,cleanandfreefromoilandgrease.
Ensure that ventilation slots are kept clean and free from
dust at all times. Blocked ventilation slots can cause
overheatinganddamagetothemotor.
If this machine is to be used when working at acertain
height, scaffolding fitted with railing and kick-plate or a
towerplatformmustbeusedinordertoguaranteesuitable
stability.
GUARD AGAINST ELECTRIC SHOCK
Avoidbodycontactwithearthedorgroundedsurfaces(e.g.
pipes,radiators,dish-washersandrefrigerators).
Power Cords
Never yank or pull the power cord to disconnect it from the
mainssupplysocket.
Never carry the power tool by its power cord. Keep the
power cord away from heat, oil, solvents and sharp
edges.
Check the tool power cord periodically and if damaged
haveitreplacedbyanauthorizedservicecenter.
Inspect extension cords periodically and replace if
damaged.
DO NOT use 2-core extension cords or reels on power
tools with an earthpath. Always use a 3-coreextension
cordorreelwiththeearthcoreconnectedtoearth.
Alwaysunwindanyextensioncordsfully.
For extension cords up to 15 metres, use a wire cross
sectionof1.5mm
2
.Forextensioncordsover15metres,
useawirecrosssectionof2.5mm
2
.
Protectyourextensioncordfromsharpobjects,excessive
heatanddamporwetlocations.
Important!
This power tool complies with National and International
Standards and safety requirements. Repairs should be
carried only out by qualified persons using original
spare parts. Failure to do so may result in considerable
danger to the use.