• Five digital inputs and one stereo input for complete system flexibility
• Supports DSD native playback by ASIO2.1 and DoP method
• Ultra-low-noise JFETs in the input stage for the lowest possible noise floor
• Volume adjustment in 99 precise 0.5dB increments
• Advanced, FPGA implemented thin-film switched-resistor ladder network for
controlling volume, with a single resistor in the signal path at any volume setting
• Individually adjustable volume on each input for precise level matching of sources
• Exclusive driver software for Windows
• Standard driver software for Mac
• Asynchronous transfer mode
• Very low power consumption on Standby Mode
• Available in black or silver anodized aluminum finish
Specifications:
Inputs:
• 1 x USB PCM / DSD Digital (PCM up to 384kHz & DSD up to DSD256 )
• 1 x Coaxial Digital S/PDIF (PCM up to 192KHz supporting DoP format DSD64)
• 1 x Optical Digital S/PDIF (PCM up to 192KHz supporting DoP format DSD64)
• 1 x Bluetooth or WiFi receiver module (optional).
• 1 x AES balance XLR
• 1 x Analog Stereo RCA
Outputs:
• 1 x pair of stereo RCA out
• 1 x pair of stereo XLR balanced out
• 1 x Optical S/DPIF out
• USB Sampling Rates: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz,
352.8KHz, 384KHz and DSD 2.8MHz(64), 5.6MHz(128), 11.2MHz(256)
• Coaxial Sampling Rates: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz,
352.8KHZ, 384KHz
• Optical Sampling Rates: 44.1KHz, 48KHz, 88.2KHz, 96KHz, 176.4KHz, 192KHz
• Bit Resolution: 16-32-bits
• THD+N: 0.0005%
• SNR > 113 dB
• Frequency Response: 10Hz to 80KHz
• Dimensions: 235 mm W x 281 mm D x 55 mm H (including feet)
• Weight: 2.3Kg
• Worldwide AC voltage: (90VAC~130VAC // 210VAC~ 250VAC) With Voltage Select
Switch
• AC Fuse: Slow-blow, 1A, 250VA
To Next Page
Loading...
