EasyManua.ls Logo

NuTone 682NT User Manual

NuTone 682NT
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR IN-
JURY TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer at the address
or telephone number listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service
panel and lock the service disconnecting means to prevent
power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a promi-
nent warning device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by a quali-
fied person(s) in accordance with all applicable codes and stan-
dards, including fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment
to prevent backdrafting. Follow the heating equipment
manufacturer’s guidelines and safety standards such as those
published by the National Fire Protection Association (NFPA),
and the American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code authori-
ties.
5. When cutting or drilling into wall or ceiling, do not damage
electrical wiring and other hidden utilities.
6. Ducted fans must always be vented to the outdoors.
7. If this unit is to be installed over a tub or shower, itmust be
marked as appropriate for the application.
8. Never place a switch where it can be reached from a tub or
shower.
9. This unit must be grounded.
CAUTION
1. For general ventilating use only. Do not use to exhaust haz-
ardous or explosive materials and vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced
impellers, keep drywall spray, construction dust, etc., off power
unit.
3. Please read specification label on product for further information
and requirements.
INSTALLATION INSTRUCTIONS
READ & SAVE THESE INSTRUCTIONS!
Ductless Fan
MODEL: 682NT
PLAN THE INSTALLATION
Refer to FIGURE 1
Determine where fan will be located and plan to supply fan with
proper line voltage and appropriate power cable.
Follow these basic steps when installing this fan:
Attach mounting bracket to joist or stud.
Snap fan housing onto bracket.
Wire fan.
Attach grille (after ceiling or wall is finished).
FIGURE 1
1”
ROUGH-IN OPENING SIZE IS 7-1/4” x 7-1/4”
7-1/8”
6-1/4”
8-1/2”
7-1/8”
8-1/2”
Question and Answer IconNeed help?

Do you have a question about the NuTone 682NT and is the answer not in the manual?

NuTone 682NT Specifications

General IconGeneral
BrandNuTone
Model682NT
CategoryFan
LanguageEnglish

Summary

Important Safety Instructions

General Safety Precautions

Instructions to reduce risk of fire, electric shock, or injury, covering usage, servicing, installation, and grounding.

Cautionary Notes

Warnings regarding specific applications, hazardous materials, and avoiding motor damage from dust.

Plan the Installation

Installation Steps Overview

Basic steps for fan installation: attaching bracket, snapping housing, wiring, and attaching grille.

Installation

Mounting Bracket and Housing Installation

Detailed steps for securing the mounting bracket and snapping the fan housing into place.

Electrical Wiring and Connections

Instructions for preparing the knockout plate, securing the power cable, and making electrical connections.

Grille Attachment

Procedure for attaching the grille by squeezing springs and inserting them into the motor plate slots.

Use and Care

Grille Cleaning

Guide for cleaning the grille using mild soap and a soft cloth, avoiding abrasive materials.

Filter Maintenance

Information on the charcoal filter's lifespan and how to order replacements.

Fan Assembly Cleaning

Instructions for cleaning the impeller, motor, and interior housing by vacuuming.

Important Usage Cautions

Critical warnings about disconnecting power before servicing and avoiding immersion of parts in water.

Parts List

Component Identification

A list of all parts with reference numbers, part numbers, and descriptions, including an exploded view.

Warranty Information

One Year Limited Warranty

Details NuTone's one-year limited warranty, exclusions, limitations, and claim procedures.

Related product manuals