NuTone CV750

BUILT-IN CENTRAL
CLEANING SYSTEM
INSTALLATION INSTRUCTIONS FOR:
MODELS: CV653 & CV750
GENERAL INFORMATION..............2
PLANNING AND LAYOUT .............2
Examples ........................................2
Locating the Power Unit..................3
Locating the Wall Inlets...................3
Tubing.............................................3
INSTALLATION IN
NEW CONSTRUCTION....................4
Wall Inlet Rough-In .........................4
Installing the Tubing........................4
Tubing Installation...........................5
Wall Inlet Installation.......................6
Model 360 Wall Inlet ...................6
Model 330 Wall Inlet ...................6
Power Unit Installation ....................7
Dimensional Chart ........................7
Mounting .......................................7
Tubing connections.......................7
Wiring............................................7
INSTALLATION IN
EXISTING CONSTRUCTION ...........8
Planning and Layout .......................8
Locating Access Keys.....................8
Wall Inlet Installation.......................8
Model 330 Wall Inlet .....................10
FLOOR INLET INSTALLATION.....10
FINAL SYSTEM CHECK................11
Model CV750 Shown

NuTone CV750 Specifications

General

Brand	NuTone
Model	CV750
Category	Cleaning Equipment
Language	English

Summary

General Information

Planning and Layout

Planning and Layout Examples

Illustrates typical installation layouts for different house styles.

Locating the Power Unit

Guidance on selecting an optimal, accessible, and safe location for the power unit.

Locating the Wall Inlets

Best practices for positioning wall inlets for maximum cleaning coverage.

Tubing

Considerations for planning the routing and installation of the system's tubing.

Installation in New Construction

Wall Inlet Rough-In

Steps for preparing wall openings and mounting inlet brackets during new builds.

Installing the Tubing

Instructions for assembling and securing the vacuum tubing network.

Installation in Existing Construction

Locating Access Keys

Identifying accessible pathways and 'keys' for running tubing in existing homes.

Wall Inlet Installation

Detailed steps for installing wall inlets in existing construction scenarios.

Floor Inlet Installation

Final System Check