5
To turn off the NUTRIBULLET - simply twist in the opposite direction
(to the right) to release the tabs and stop pressing down on the cup.
Once the power base stops completely, remove the cup from the
power base.
HOW IT WORKS
Extracting
1
Fill ingredients into the NUTRIBULLET Cup.
2
Add the liquid of your choice up to the MAX line.
(Liquid is required!).
3
Twist the Extractor Blade onto the NUTRIBULLET
Cup and hand tighten to make sure the
vessel has been sealed.
4
Press the vessel blade side-down onto the
Power Base. Press down and twist to extract
for no longer than 1 minute. If more extraction
is needed, wait 1 minute, then repeat the
extraction process in 1 minute intervals
up to 3 times as needed to achieve the
desired consistency. If more than 3 1-minute
extractions are needed, allow the power base
to cool for 2-3 minutes after the third extraction
before beginning the next round. You can see
the extraction process happening. Keep an eye
on the consistency. Your NUTRIBLAST is ready
when it looks smooth and creamy!
8 9
CAUTION: FRICTION FROM THE ROTATING BLADE WHEN EXTRACTING
CAN CAUSE INGREDIENTS TO HEAT AND GENERATE INTERNAL PRESSURE
IN THE SEALED VESSEL. IF THE VESSEL IS WARM TO TOUCH, ALLOW TO
COOL BEFORE CAREFULLY OPENING POINTED AWAY FROM YOUR BODY.
To Next Page
Loading...
