Before pressing either Power
Button, you can finely adjust
the speed by turning the
Speed Dial and then pressing
the Low-Speed (I) button.
NOTE: The Variable Speed Dial
may only be used when pressing
the Low-speed button.
Pressing either speed button
activates the motor. Releasing
the button stops the unit. The
button must be depressed
continuously for blending
operation to continue.
CAUTION: Do not operate the
unit for long periods of time without
blending any ingredients.
CAUTION: Do not put fingers,
palms, utensils, or foreign
objects on or near attachment
during operation.
6 When you are done, release
the power button to shut o
the blender.
7 Remove the blender from
your mixing vessel. Gently
shake o any excess mixture
from the blending arm.
CAUTION: Wait until the motor
comes to the complete stop before
removing the blending arm from
the mixture, especially if the mixture
is hot so as to avoid splatter and
thermal injuries.
13
To Next Page
Loading...
