The extraction cycle will
automatically run for 1
minute. If you’d like to stop
extracting before the cycle
is over, proceed to step 8.
Plug the power cord into
an electrical outlet.
5
4
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
6
Turn the cup upside down
and place it onto the motor
base, gently turning the cup
clockwise to lock into the
motor base. This will activate
the extraction cycle.
7
8
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE: Blending should not require
longer than one minute to yield
smooth and creamy results.
CAUTION
Do not remove the easy-twist
extractor blade from the
NutriBullet
®
cup until blending
has completely ceased. Do not
use the easy-twist extractor blade
as a storage lid for your cup.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. When storing
contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from
your body when unsealing.
17
To Next Page
Loading...
