NUTRIBULLET PRO 1000 - Care & Maintenance; Cleaning the NutriBullet

18
Care & maintenance.
NutriBullet
®
cups) as
recommended in the
this section.
MOTOR BASE:
• To avoid risk of injury NEVER
attempt to clean the actuator
system on the motor base
while the NutriBullet PRO
®
1000 is plugged in.
• Do not attempt to remove any
pieces from the motor base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the
motor base until clean.
• If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it’s clean.
• To clean leakage residue
from the motor base, wipe
with a damp sponge and
warm water.
WARNING: Never submerge
the motor base in water.
EASYTWIST
EXTRACTOR BLADE:
• Blades are sharp! Handle
the easy-twist extractor
blade with care when
cleaning! Blades are TOP
RACK dishwasher-safe.
It is best to clean blades
immediately after use to
Here’s how to clean
the NutriBullet
®
:
STEP 1:
The most important thing —
ALWAYS POWER OFF THE UNIT
and UNPLUG the motor base
from the power outlet when it
is not in use. Do not attempt to
handle the appliance until all
parts have stopped moving!
This includes during assembly
and disassembly, while
changing accessories during
cleaning, and any time you
leave the machine unattended.
STEP 2:
Detach the NutriBullet
®
cup
and easy-twist extractor blade
from the motor base.
STEP 3:
Clean the individual
components (motor base,
easy-twist extractor blade,
Cleaning the NutriBullet
®
is easy.
The cups, lids, and blades are
TOP RACK dishwasher-safe.
Motor base can be quickly
hand-washed with soap and
water. Read on for best practices.
Please follow the below cleaning
instructions before the first use,
and after each use. Cleaning the
NutriBullet® Pro 1000 is easy.