20
If the ingredients stick to
the side of the pitcher,
press POWER to stop the
appliance and wait for the
blade to stop turning. Then
remove the pitcher lid and
use the tamper to dislodge
the ingredients. When
finished, replace the lid and
continue blending. If the
ingredients continue to stick,
consider adding more liquid.
7
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
9
8
To start blending, select
a speed or the EXTRACT
program on the blending
control panel. This program
will turn o automatically.
Buttons illuminate while in use.
NOTE: Proceed to the blending
control panel chart on page 24
for speed definitions.
To Next Page
Loading...
