26
Care & maintenance
MOTOR BASE:
• To avoid risk of injury, NEVER
attempt to clean the actuator
system on the motor base
while the nutribullet
®
Select is
plugged in.
• Do not attempt to remove any
pieces from the motor base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the
motor base until clean.
• If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it’s clean.
• To clean leakage residue
from the motor base, wipe
with a damp sponge and
warm water.
• If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it’s clean.
WARNING: Never submerge
the motor base in water.
Here’s how to clean
the nutribullet
®
:
Please follow the below
cleaning instructions before
the first use, and after each use.
STEP 1: The most important
thing — ALWAYS POWER OFF
THE UNIT and UNPLUG the mo-
tor base from the power outlet
when it is not in use. Do not
attempt to handle the applian-
ce until all parts have stopped
moving! This includes during
assembly and disassembly,
while changing accessories du-
ring cleaning, and any time you
leave the machine unattended.
STEP 2: Detach the nutribullet
®
cup / easy-twist extractor
blade or pitcher from the
motor base.
STEP 3: Clean the individual
components (motor base,
easy-twist extractor blade,
nutribullet
®
cups, or pitcher) as
recommended in this section.
Cleaning the nutribullet
®
Select is easy. The pitcher is dishwasher-safe
while the cups and to-go lids are TOP RACK dishwasher-safe.
The easy-twist extractor blade and motor base can be quickly
hand-washed with soap and water. Read on for best practices.
To Next Page
Loading...
