NUTRIBULLET Select - Stove-Top Heating Safety

9
damage the power
cord. Do not allow
the cord to touch hot
surfaces, including
the stove.
• If the motor stops
working, unplug the
motor base and let
it cool for at least
15 minutes before
attempting to use it
again. Your nutribullet
®
Select has an internal
thermal breaker that
shuts o the motor when
it overheats. The thermal
breaker will reset when
the unit is unplugged,
and the thermal breaker
cools down suciently.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in
order to avoid a hazard.
CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer,
or connected to a
circuit that is regularly
switched on and o
by the utility.
STOVETOP
HEATING SAFETY
Do not blend hot
ingredients in any sealed
nutribullet
®
cup!
To heat items that have
been blended at room
temperature or cooler
(21°C/70°F or less),
transfer mixture to a
stovetop pot to heat. Use
a thermometer to test
the internal temperature
of cooked ingredients;
they may feel cool to
the touch, yet still be
hot inside.
The nutribullet
®
Select
is not intended for use
on the stove top. Do
not place the motor
base or any nutribullet
®
accessory on the
stove or microwave
or immerse in boiling
water. This may result
in damage to the
accessory.
WARNING!
WARNING! WARNING!